Lately hen I tried to read the SBN-file it took 15min before GPSAR PRO finally opened it, and it looked like every session I got more spikes. I don't like that!!! GPSAR PRO did crash several times.
I think this is simply a software problem, so this is what I have done:
1) Software Reset
-upzip file and you get: NAVI_FW.S file
-Put Navi gps CD in computer
-Install firmware software NAVIFU.exe
-attach gps with usb to computer
-put gps in on-mode
-run NAVIFU.exe
-Select right updat file: NAVI_FW.S
-Select right com
-Start update
2) Format SD-Card
-first put the data somewere safe (cd, extern harddisk, etc)
-Format SD-card with computer 2-3 times
-If it doesn't fail formatting the card is good enough
Only thing I changed is Hold Key, I like the keylock function, without it I had a few times the display didn't show me the last run.
Memory Card
LOG SWITCH:__________ON
MIN SPEED:___________1 KT
NMEA ITEMS:_________SBN 1-SEC
FILE SIZE:____________CARD SIZE
FORMAT CARD:________[erase all data from memory card]
REMOVE CARD:________[after this command you can remove the card]
Data Logger
INTERVAL:____________1 SEC
MIN SPEED:___________3 Knot
SAVE TO CARD:________[copy session to memory card]
CLEAR:_______________[datalogger session will be cleared]
Alert
BUZZER:______________ON
OVER SPEED:__________40 Knot
ALTITUDE:____________OFF
TARGET______________OFF
Settings
LANGUAGE:___________ENGLISH
TIMEZONE:____________+1(Amsterdam)
UNIT:________________NM
FUNCTION:____________NAVIGATION
DOP:_________________0
TIME FORMAT:_________24H
DATE FORMAT:_________YY/MM/DD
ARRIVED:______________50 Feet
MAP DATUM___________WGS84
POSITION:_____________DD.DDDDDD
USER GRID:____________L=E102 s=1.000000 X=500000 Y=0
POWER MODE:__________NORMAL
DGPS SOURCE:__________OFF
INTERFACE:____________BINARY
BACKLIGHT:____________ON
BACKLIGHT TIME:_______10 SECONDS
CONTRAST:_____________[middle]
EXT. POWER MODE:______OFF
USERNAME:____________(Your Name)
USAGE:________________[stats... usage wayoints etc..]
DEFAULT VALUE:________[back to factory settings] * Don't Press or start again!!
NMEA BIN ALIGN:_______OFF
SPEED AVG TIME:_______10 SEC
SPEED GENIE:__________25knot
HOLD KEY:____________MARK
SERIAL NO.:___________1003281
VERSION:_____________V1.62 (B1115)
LOG SWITCH:__________ON
MIN SPEED:___________1 KT
NMEA ITEMS:_________SBN 1-SEC
FILE SIZE:____________CARD SIZE
FORMAT CARD:________[erase all data from memory card]
REMOVE CARD:________[after this command you can remove the card]
Data Logger
INTERVAL:____________1 SEC
MIN SPEED:___________3 Knot
SAVE TO CARD:________[copy session to memory card]
CLEAR:_______________[datalogger session will be cleared]
Alert
BUZZER:______________ON
OVER SPEED:__________40 Knot
ALTITUDE:____________OFF
TARGET______________OFF
Settings
LANGUAGE:___________ENGLISH
TIMEZONE:____________+1(Amsterdam)
UNIT:________________NM
FUNCTION:____________NAVIGATION
DOP:_________________0
TIME FORMAT:_________24H
DATE FORMAT:_________YY/MM/DD
ARRIVED:______________50 Feet
MAP DATUM___________WGS84
POSITION:_____________DD.DDDDDD
USER GRID:____________L=E102 s=1.000000 X=500000 Y=0
POWER MODE:__________NORMAL
DGPS SOURCE:__________OFF
INTERFACE:____________BINARY
BACKLIGHT:____________ON
BACKLIGHT TIME:_______10 SECONDS
CONTRAST:_____________[middle]
EXT. POWER MODE:______OFF
USERNAME:____________(Your Name)
USAGE:________________[stats... usage wayoints etc..]
DEFAULT VALUE:________[back to factory settings] * Don't Press or start again!!
NMEA BIN ALIGN:_______OFF
SPEED AVG TIME:_______10 SEC
SPEED GENIE:__________25knot
HOLD KEY:____________MARK
SERIAL NO.:___________1003281
VERSION:_____________V1.62 (B1115)
Goed van je dat je al deze info deelt, Erik!
ReplyDeleteIkzelf heb wel een paar instellingen anders:
DGPS source: SBAS (staat voor sattelite based differential). deze instelling maakt dat het signaal van WAAS sattelitieten wordt gebruikt en dat positie ongeveer twee keer nauwkeuriger wordt. Op de snelheidsmeting zal het niet veel invloed hebben.
Ook heb ik de backlight op uit staan. Hierdoor gaat de batterij nog aanzienlijk langer mee
Groet,
Aart-Jan
Check out the new GT-31 and settings (follow the link)
ReplyDeletehi, i have inherited a GT11 but it has really old firmware. i have the firmware updates but not the installer software Locosys no longer supports the GT11, do you know where I can get NAVIFU.exe? thanks for your help.
ReplyDeleteby the way, this is easily the best speedsurfing site around. ;o)
regards,
Mark