
Some Measurements first
Length 245cm
Width 60cm
Volume 90 ltrs
OFO 35cm or 38cm (reduced tail or total)
This board will not be my lightwind speedboard, the reason is because the board its sweetspot is more focussed on higher winds. This was happening on the water, I tested 3 sessions, every time I was waiting for good wind. And when the board really aggresively accelerated in a controlable way I was sooo close to the Falcon 79 sweetspot. In other words, this board is too fast for myself as an lightwind-speedboard.
Still I would recommend everybody to buy this board. It fits a lot of conditions, not like the falcon monoconcave which like flatter water or other shapes that seem to work on more specific chop.
"Wolf in Sheep Clothes"
The speedpotential seems to be unlimited, like the fanatic falcon 80 or 79... I found the directional stability very good, it was easy to steer between waves, even at higher speeds. My best speed was about 68kmh/36.7kn on this board, I wanted to test this board on a flat spot because I think the board can do at least 42kn. The scoop-rockerline is very VERY good, wouldn't change that. The nose has not really a function I would say, it looks eehhh different.
There are some little flaws for pure speedsurfing, however since the board is developed for PWA slalom Angulo's thought are clear for me. Things I would like to change for a really competitive (lightwind) speedboard:
- Other footstrap positions (more outside)
- No tailreduction and/or a bit less V in the tail
- I would like the tail to be a bit thinner (underneath back footstrap)
Someday I will be able to do this kind of finetune projects, without the danger of a season without a 100% good lightwind speedboard... Would be fun to do an article "how to make the perfect lightwind speedboard"
PS:: gybing is REALLY supereasy
Hehe, the nose.
ReplyDeleteWe discussed about it some time ago at www.surf-forum.com. For sure it looks not really good, but if you say it doesn't has some effect maybe this is the reason:
They reduced some material to reduce the weight without effect on the properties.